59 lines
3.1 KiB
Plaintext
59 lines
3.1 KiB
Plaintext
# Description:
|
|
# This configuration allows you to connect an OPNsense or pfSense router at hoport and connect it to a VPS IP.
|
|
# It use public IP to redirect traffic to different machines behind the VPS for security reasons rather than opening ports on your hoport router.
|
|
|
|
# Prerequisites:
|
|
# - Have a VPS server at OVH or ionos with Debian
|
|
# - Install https://github.com/angristan/wireguard-install and generate a client
|
|
# - Know the network interface with the 'ip a' command and replace ens6 with the appropriate interface
|
|
# - Know the public address or IP addresses of the clients
|
|
|
|
# Backup of the current configuration before modifying it
|
|
# Perform this backup before any modification
|
|
# cp /etc/wireguard/wg0.conf /etc/wireguard/wg0.conf.bak
|
|
|
|
# Modification of the WireGuard configuration
|
|
# Open the configuration file to modify it
|
|
# nano /etc/wireguard/wg0.conf
|
|
# Delete the columns what is between 'PrivateKey = x'and '### Client opnsense'
|
|
# Replace 'add-port' with 'add-ip-public' information
|
|
|
|
# Configuration of the WireGuard interface on the server side
|
|
[Interface]
|
|
Address = 10.66.66.1/24, fd42:42:42::1/64
|
|
ListenPort = 666
|
|
PrivateKey = x
|
|
|
|
# iptables rules to apply after setting up the WireGuard interface
|
|
PostUp = iptables -I INPUT -p udp --dport add-port -j ACCEPT
|
|
PostUp = iptables -A FORWARD -i wg0 -o ens6 -j ACCEPT
|
|
PostUp = iptables -A FORWARD -i ens6 -o wg0 -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
|
|
PostUp = iptables -I FORWARD -i wg0 -s 10.66.66.0/24 -d 10.66.66.0/24 -j DROP
|
|
|
|
PostUp = iptables -t nat -A POSTROUTING -s 10.66.66.2/32 -o ens6 -j SNAT --to-source add-ip-public # NAT for outgoing traffic from the opnsense client
|
|
PostUp = iptables -t nat -A PREROUTING -i ens6 -d add-ip-public -p tcp --dport 80 -j DNAT --to-destination 10.66.66.2:80 # Redirect port 80 to the opnsense client
|
|
PostUp = iptables -t nat -A PREROUTING -i ens6 -d add-ip-public -p tcp --dport 443 -j DNAT --to-destination 10.66.66.2:443 # Redirect port 443 to the opnsense client
|
|
|
|
# iptables rules to remove when deleting the WireGuard interface
|
|
PostDown = iptables -D INPUT -p udp --dport add-port -j ACCEPT || true
|
|
PostDown = iptables -D FORWARD -i wg0 -o ens6 -j ACCEPT || true
|
|
PostDown = iptables -D FORWARD -i ens6 -o wg0 -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT || true
|
|
PostDown = iptables -t nat -D POSTROUTING -s 10.66.66.2/32 -o ens6 -j SNAT --to-source add-ip-public || true
|
|
PostDown = iptables -t nat -D PREROUTING -i ens6 -d add-ip-public -p tcp --dport 80 -j DNAT --to-destination 10.66.66.2:80 || true
|
|
PostDown = iptables -t nat -D PREROUTING -i ens6 -d add-ip-public -p tcp --dport 443 -j DNAT --to-destination 10.66.66.2:443 || true
|
|
|
|
### Client opnsense
|
|
[Peer]
|
|
PublicKey = x
|
|
PresharedKey = x
|
|
AllowedIPs = 10.66.66.2/32,fd42:42:42::2/128
|
|
|
|
# Restart the WireGuard service after modifying the configuration
|
|
# sudo systemctl restart wg-quick@wg0
|
|
# sudo systemctl status wg-quick@wg0
|
|
|
|
# OPNsense configuration:
|
|
# Follow the steps described in the OPNsense docuportntation:
|
|
# https://docs.opnsense.org
|
|
# Configure port forwarding from the OPNsense router to the local IP of the WireGuard client
|
|
# For example, forward the port from 192.168.1.x to add-ip-wglocal-1 |